Navigating The Smt Interface; Table 2-2 Main Menu Commands - ZyXEL Communications P-202 User Manual

Prestige 201 ISDN Access Router
2.6

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
Operation Press/<read>
Move forward to [ENTER]
another menu
Move backward to [ESC]
a previous menu
Move to a Press the
submenu [Space bar] to
change No to
Yes then press
[ENTER].
Move the cursor [ENTER] or
[Up]/[Down]
arrow keys
Enter information Fill in, or
Press the
[Space bar] to
toggle
Required fields
<
N/A fields <N/A>
Save your [ENTER]
configuration
Exit the SMT Type 99, then
press [ENTER].
Hardware Installation & Initial Setup

Table 2-2 Main Menu Commands

Description
To move forward to another menu, type in the number of the
desired menu and press [ENTER].
Press the [ESC] key to move back to the previous menu.
Fields beginning with "Edit" have a default setting of No. Press the
[Space bar] to change No to Yes, then press [ENTER] to go to a
submenu.
Within a menu, press [ENTER] to move to the next field. You can
also use the [Up]/[Down] arrow keys to move to the previous and
the next field, respectively.
You need to fill in two types of fields. The first requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing the [Space] bar.
All fields with the symbol <?> must be filled in order be able to save
?
>
the new configuration.
Some of the fields in the SMT will show a <N/A>. This symbol
refers to an option that is Not Applicable.
Save your configuration by pressing [ENTER] at the message
[Press ENTER to confirm or ESC to cancel]. Saving the data on the
screen will take you, in most cases to the previous menu.
Type 99 at the Main Menu prompt and press [ENTER] to exit the
SMT interface.
2-5