Linhai ATV 500-D T3 EFI Service Manual page 80

CHAPTER 3 ENGINE
Remove cylinder bolt
Remove cylinder
Note：Take care not to drop dowel pin
into crankcase
Remove dowel pin and cylinder gasket
Note：When performing above removal process,
be sure to hook up timing chain to
prevent it from falling into crankcase
Piston
Remove piston pin circlip① with long nosed pliers
Note: Put a clean rag under piston so as not to
drop piston pin circlip into crankcase
Remove piston pin②and piston③
Notes:
When installing piston, make sure its
identification conforms to that of cylinder;
When removing piston pin, clean off burrs of
piston pin hole and groove. If it's difficult to
remove the piston, DO NOT hammer, use a
special remover④
Tool: Piston Pin Remover
ΔEngine Left Side
Starting Motor
Remove 2 bolts of starting motor
Remove starting motor
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 47