Linhai ATV 500-D T3 EFI Service Manual page 173

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
3.6.2.9.1 Mot or Scanner ( for MT05 EMS)
3.6.2.9.1.1 P re c a u t i o ns
  M otor-Scanner is a precision instrument and should be protected from vibration
and impact.
  I f the unit does not run correctly or the screen is unstable when first turned on,
disconnect it from the main lead and try again.
  M ake sure the DLC is always firmly inserted into the diagnostic socket.
  N ever test electrical signals that exceed the limit of specifications.
  T est cannot be performed by the person who is driving the car.
  T his unit should be used and stored in the following conditions:
Ambient temperature: 0~50℃
Relative humidity: <90%
3.6.2.9.1.2 .Co nf ig ur a t io ns
Delphi Motor scanner consists of 2 main part: the main units (with diagnostic main
cable) and diagnostic connector link (one end is 6PIN connector; the other is the
interface for connecting diagnostic main cable). They are shown in figure 34 as
below.
Ou t l i n e o f Ma i n Un i t
The 6 PIN diagnostic connector link cable and USB type main unit's software
update cable are in the delivered package.
CHAPTER 3 ENGINE PAGE. 3- 140