Linhai ATV 500-D T3 EFI Service Manual page 217

CHAPTER 5 FINAL DRIVE
5. Remove the mounting bolt of rear shock absorber and upper and lower A-arm. Takedown the
A-arm components.
6. Remove the mounting bolt of the rear hub, after that inspect bushes, A-arms and collar.
Replace if worn. Discard hardware.
7. Using hub extractor to take down the rear hub.
8. Remove oil seal.
9. Remove the snap spring of the rear hub.
LH500ATV-D T3 EFI SERVICE MANUAL 19.0
CHAPTER 5 FINAL DRIVE. 5- 13