Linhai ATV 500-D T3 EFI Service Manual page 116

CHAPTER 3 ENGINE
Put the guide bar on a flat plate and roll it. In case of
any bend, replace with a new one.
NOTE:DON NOT attempt to correct a bent guide bar.
Check shift fork spring for breakage, damage
Broken or damaged: → Replace
Check shift cam groove for scratches, damage.
Scratch or damage: → Replace
Assembly
Reverse the removal procedure for assembly. Pay
attention to the following:
Use new retainers. Pay attention to the direction of
the retainers. Fit to the side where the thrust is as
illustrated.
Coat the gears and shafts with engine oil before
assembly.
Note:
Do not reuse the retainers
Do not expand of the gap end of new retainers too
wide when assembling.
Make sure that all the retainers are properly fitted.
LH500ATV-D T3 EFI SERVICE MANUA 19.0
CHAPTER 3 ENGINE PAGE. 3- 83