Linhai ATV 500-D T3 EFI Service Manual page 218

CHAPTER 5 FINAL DRIVE
10. Using bearing extractor to take down the hub bearing.
Notice: when reassembling hub bearing that were removed and rear hub, which are need
replaced. (The method is in accordance with removing steering knuckle.)
5.5 REAR GEAR CASE COMPONENT IDENTIFICATION
REAR GEARCASE EXPLODED VIEW
1 DRIVE BEVEL GEAR ASSEMBLY, RA
2 REAR GEAR CASE
3-1 ADJUST SHIM(1) 1.0
3-2 ADJUST SHIM(1) 1.2
3-3 ADJUST SHIM(1) 1.4
3-4 ADJUST SHIM(1) 1.6
3-5 ADJUST SHIM(1) 1.8
5-1 ADJUST SHIM(2) 0.2
5-2 ADJUST SHIM(2) 0.3
LH500ATV-D T3 EFI SERVICE MANUAL 19.0
19 COUPLER, REAR AXLE
20 REAR GEAR CASE
21 BOLT M8×12.5
22 WASHER 8.2×15×1.5
23 BOLT M20×1.5×12
24 O-RING 19×2.5
25 BREATHER PIPE
26
27 BOLT M14×1.25×12
CHAPTER 5
PIPE JOINT
FINAL DRIVE. 5- 37