Linhai ATV 500-D T3 EFI Service Manual page 221

CHAPTER 5 FINAL DRIVE
the rear gear case S.
→Fig 5
6. Remove the oil seal 65×90×9 U from the rear
gear case S.
Remove the needle bearing V from the rear
gear case S.
→Fig 6
Fig 6
7. Remove the adjust shim W from the bevel
gear comp.-driven X.
Remove the bevel gear comp.-driven X from
the ring gear bearing housing T.
Remove the adjust shim Y from the bevel
gear comp.-driven X.
→Fig 7
Fig 5
LH500ATV-D T3 EFI SERVICE MANUAL 19.0
8. Remove the O-ring Z，the oil seal 65×90×9
a and the bearing b from the ring gear
bearing housing T.
→Fig 8
CHAPTER 5
Fig 7
Fig 8
FINAL DRIVE. 5- 17