Linhai ATV 500-D T3 EFI Service Manual page 41

CHAPTER 3 ENGINE
LH500ATV-D T3 EFI SERVICE MANUA 19.0
Remove the 18 bolts for drive shafts
and front and rear axles.
(Refer to P. 5-5, Bolt 3 of Part No.5)
Remove:
--Front and rear axles, drive shafts, rear brake disc
Installation:
Reverse the removal procedure for installation.
Tightening torque:
Bolt, front axle：40-50N.m
Bolt, rear axle：40-50N.m
Bolt, front and rear drive shafts：40-50N.m
Gearshift Unit
Remove:
--Left and right side panel
--Fuel tank top cover
--Front fender
--Bolt
--Gearshift rod
Remove the 2 bolts
Remove gearshift unit
Installation:
Reverse the removal procedure for installation.
Make sure that gearshift is flexible.
In case of any inflexibility, adjust the gearshift rod to
ensure the gear engagement.
CHAPTER 3 ENGINE PAGE. 3- 8