Access Control; Figure 52 Advanced: Access Control - ZyXEL Communications ZyXEL NBG-415N User Manual

ZyXEL NBG-415N User's Guide
Table 31 Advanced: Routing (continued)
LABEL
Metric
Interface
Exiting Routes
Destination IP
Netmask
Gateway
Metric
Interface
Creator

7.6 Access Control

Internet access control allows you to create and enforce Internet access policies tailored to
your needs. Access control gives you the ability to block specified computers and/or
applications from accessing the Internet. You can also set a schedule for when the ZyXEL
Device performs content filtering.
Follow the steps below to configure an access control rule.
1 Click Advanced > Access Control to display the configuration screen.
2 Select Enable Access Control to activate this feature.

Figure 52 Advanced: Access Control

3 Click Add Policy to display the wizard screen. This screen outlines the steps to create an
access control policy. Click Next.
83
DESCRIPTION
This field displays the "cost" of this route.
This field displays the interface to which this routing setting is applied.
This field displays the destination IP address.
This field displays the subnet mask for the destination IP address above.
This field displays the IP address of the gateway device.
This field displays the "cost" of this route.
This field displays the interface to which this routing setting is applied.
This field displays the person/device that created this static route on the ZyXEL
Device.
Chapter 7 Advanced