Rear Panel; Table 1 Front Panel Leds - ZyXEL Communications ZyXEL NBG-415N User Manual

The following table describes the LEDs.

Table 1 Front Panel LEDs

LED COLOR
PWR
Green
LAN1 ..
4
Green
WAN
Green
WLAN
Amber
Green
USB
Green

1.3 Rear Panel

The following figure shows the rear panel.
Chapter 1 Getting Started
STATUS DESCRIPTION
Off The ZyXEL Device is not receiving power.
On The ZyXEL Device is receiving power and ready.
Blinking The ZyXEL Device is resetting to the factory defaults.
Off No device is connected to this port.
On An Ethernet device is connected to this port.
Blinking The ZyXEL Device is sending/receiving data on this port.
Off The WAN connection is not ready, or has failed.
On The ZyXEL Device has a successful WAN connection for
Internet access.
Blinking The ZyXEL Device is sending/receiving data over the WAN port.
Off The WLAN is disabled.
On Pre-N WLAN is enabled on the ZyXEL Device.
Blinking The ZyXEL Device is sending/receiving data over the pre-N
WLAN.
On IEEE 802.11b/g WLAN is enabled on the ZyXEL Device.
Blinking The ZyXEL Device is sending/receiving data over the IEEE
802.11b/g WLAN.
Off The USB port is not in use
Blinking (3 Windows Connect Now setup is successful.
Times)
Blinking Windows Connect Now setup is not successful.
(Continuous)
ZyXEL NBG-415N User's Guide
24