ZyXEL Communications ZyXEL NBG-415N User Manual page 80

Table 30 Advanced: StreamEngine (continued)
LABEL
Manual Uplink
Speed
Connection
Type
Detected xDSL
or Framerelay
Network
Add StreamEngine Rule
Enable
Name
Priority
Protocol
Source IP
Range
Source Port
Range
Destination IP
Range
Destination Port
Range
Save
Clear
StreamEngine Rule List
Enable
Name
Priority
Source IP
Range
Destination IP
Range
Protocol/Ports
Chapter 7 Advanced
DESCRIPTION
This field is not applicable when you select the Automatic Uplink Speed option
above.
Enter a number or select a pre-defined choice from the drop-down list box to
manually set the uplink speed for the WAN connection.
Select Auto-detect to set the ZyXEL Device to automatically detect the Internet
connection type.
Select xDSL or Other Frame Relay Network if the ZyXEL Device connects to the
Internet via a DSL modem.
Select Cable or Other Broadband Network if the ZyXEL Device connects to the
Internet via a cable modem.
This field is applicable when you select Auto-detect in the Connection Type field.
This field displays the name of the detected line connection type.
Select this option to enable this rule.
Enter a descriptive name for identification purposes.
Specify a priority for the traffic type specified below. Enter a number between 1
(highest) and 255 (lowest).
Enter the protocol number or select a pre-defined protocol type from the drop-down
list box.
Specify one or a range of source IP addresses in the fields provided. Enter the same
IP address in the to field if you want to specify one IP address.
Specify one or a range of source port numbers. Enter the same number in the to field
if you want to specify one source port.
Specify one or a range of destination IP addresses in the fields provided. Enter the
same IP address in the to field if you want to specify one IP address.
Specify one or a range of destination port numbers. Enter the same number in the to
field if you want to specify one destination port.
Click Save to save the settings.
Click Clear to start configuring this part of the screen again.
Select this option to activate this rule. Clear this check box to disable this rule without
deleting it.
THis field displays the descriptive name for the rule.
This field displays the priority level (1 to 255) of this rule.
This field displays one or a range of source IP addresses.
This field displays one or a range of destination IP addresses.
This field displays the protocol and port numbers.
ZyXEL NBG-415N User's Guide
80