Figure 35 Basic: Wan: L2Tp; Table 17 Basic: Wan: L2Tp - ZyXEL Communications ZyXEL NBG-415N User Manual

Figure 35 Basic: WAN: L2TP

The following table describes the related fields in this screen.

Table 17 Basic: WAN: L2TP

LABEL
MODES
WAN
L2TP WAN MODE
Address Mode
L2TP IP Address
L2TP Subnet Mask This field is applicable if you select Static IP in the Address Mode field.
L2TP Gateway IP
Address
Chapter 4 WAN
DESCRIPTION
Select L2TP if your ISP gives you Internet access account information (such as
the username and password).
Select Dynamic IP If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static IP If your ISP assigned a fixed IP address. The set the following
fields.
This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
Enter the subnet mask for the IP address.
This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address of the router through which this WAN connection will send
traffic (the default gateway).
ZyXEL NBG-415N User's Guide
50