Figure 57 Advanced: Access Control: Wizard: Filtering Method; Table 33 Advanced: Access Control: Wizard: Filtering Method - ZyXEL Communications ZyXEL NBG-415N User Manual

Table 32 Advanced: Access Control: Wizard: Select Machine (continued)
LABEL
Dest Port Start
Dest Port End
Save
Clear
Access Control Rules List
Enable
Policy
Machine
Schedule
Web Filter
Logged
7 Select the access control method, the filter(s) to apply and click Next.

Figure 57 Advanced: Access Control: Wizard: Filtering Method

The following table describes the labels in this screen.

Table 33 Advanced: Access Control: Wizard: Filtering Method

LABEL
Method
Log Web
Access Only
Block All
Access
Block Some
Access
Sentinel Services
Chapter 7 Advanced
DESCRIPTION
Enter the start of the destination port range.
Enter the end of the destination port range.
Click Save to save the settings in this part of the screen.
Click Clear to start configuring this part of the screen again.
Select this option to activate the rule. Clear this check box to disable the rule
without deleting it.
This field displays the name of the port filter policy you configured for this access
control rule.
This field displays the IP or MAC address of the device to which this access control
rule is applied.
This field displays the name of the schedule to use.
This field indicates whether web filters apply to this access control rule.
This field indicates whether Internet access activities are logged.
DESCRIPTION
Select this option to set the ZyXEL Device to create logs for Internet access
activity.
Select this option to disallow the specified Ethernet device(s) from accessing the
Internet.
Select this option to allow or deny access to specified destination(s).
This field displays when you select Block Some Access.
Select this option to block access to web sites classified in the specified
category(ies).
ZyXEL NBG-415N User's Guide
86