Wan Configuration: Static Ip - ZyXEL Communications ZyXEL NBG-415N User Manual

ZyXEL NBG-415N User's Guide
Table 13 Basic: WAN: Dynamic IP (continued)
LABEL
BigPond
Password
Verify
Password
DNS Settings
Use these DNS
Servers
Primary/
Secondary
DNS Server
Advanced >>
<< Advanced
Use the Default
MTU
MTU
Link Drop Delay
MAC Cloning
Enabled
MAC Address
Clone Your PC's
MAC Address

4.2.2 WAN Configuration: Static IP

Select Dynamic IP in the WAN screen when your ISP gives you a fixed public IP address.
45
DESCRIPTION
Type the password associated with the user name above. Use up to 64 ASCII
characters except [, ] and ?. This field can be blank.
Type your password again for confirmation.
Select this option to manually enter the DNS server IP address(es) in the field(s)
provided.
Enter the IP address (provided by your ISP) of the DNS server in dotted decimal
notation.
Click Advanced >> to display more WAN configuration fields.
Click << Advanced to hide the advanced WAN configuration fields.
Maximum Transmission Unit (MTU) is a parameter that determines the largest
packet size (in bytes) that the ZyXEL Device will send to the WAN. If LAN devices
send larger packets, the ZyXEL Device will break them into smaller packets.
Ideally, you should set this to match the MTU of the connection to your ISP.
Select this option to use the default MTU. Clear this checkbox to manually enter
an MTU size below.
Enter the MTU size (between 256 and 2296). Typical values are 1500 bytes for
an Ethernet connection and 1492 bytes for a PPPoE connection. Make sure the
MTU size matches the ISP's network or Internet connection may fail.
Select this option to set the ZyXEL Device to copy the MAC address of your
computer.
Enter the IP address of the computer on the LAN whose MAC you are cloning.
It is recommended that you clone the MAC address prior to hooking up the WAN
port.
Click Clone Your PC's MAC Address to have the ZyXEL Device automatically
copy the MAC address from your computer.
Chapter 4 WAN