Ping; Figure 86 Tool: Ping; Table 46 Tools: Ping - ZyXEL Communications ZyXEL NBG-415N User Manual

Table 45 Tools: DDNS (continued)
LABEL
Host Name
Username or Key
Password or Key
Verify Password or
Key
Timeout

8.7 Ping

You can use the Ping Test screen to check whether the ZyXEL Device can connect to other
Ethernet devices on your network and the Internet. When the ping feature is activated, the
ZyXEL Device sends a message to the Ethernet device you specify. If the Ethernet device
receives the message, it sends back messages in reply.
To use the ping feature, you must know the IP address or domain name of the Ethernet device
you are trying to communicate with. Click Tools > Ping to display the configuration screen.

Figure 86 Tool: Ping

The following table describes the labels in this screen.

Table 46 Tools: Ping

LABEL
Ping Test
Host Name or Ping
Address
Chapter 8 Tools
DESCRIPTION
Enter the system name.
Enter your user name. You can use up to 31 alphanumeric characters (and the
underscore). Spaces are not allowed.
Enter the password associated with the user name above. You can use up to 31
alphanumeric characters (and the underscore). Spaces are not allowed.
Enter the password again for confirmation.
Specify the time (in hours) the ZyXEL Device waits before time out.
DESCRIPTION
Enter the IP address or the domain name of the Ethernet device to which you
want to test the connection.
ZyXEL NBG-415N User's Guide
114