Figure 3-5 Menu 3.2.1 - Ip Alias Setup; Table 3-3 Ip Alias Setup Menu Fields - ZyXEL Communications Prestige 645R User Manual

Prestige P645 ADSL Internet Access Router
Press Space Bar to Toggle.
Use the instructions in the following table to configure IP Alias parameters.
FIELD
IP Alias Choose Yes to configure the LAN network for the Prestige.
IP Address Enter the IP address of your Prestige in dotted decimal notation.
IP Subnet Mask Your Prestige will automatically calculate the subnet mask based on
the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the Prestige.
RIP Direction Press the [SPACE BAR] to select the RIP direction. Options are:
Both, In Only, Out Only or None.
Version Press the [SPACE BAR] to select the RIP version. Options are: RIP-
1, RIP-2B or RIP-2M.
Incoming Enter the filter set(s) you wish to apply to the incoming traffic
Protocol Filters between this node and the Prestige.
Outgoing Enter the filter set(s) you wish to apply to the outgoing traffic between
Protocol Filters this node and the Prestige.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to save
your configuration, or press [ESC] at any time to cancel.
3-8
Menu 3.2.1 - IP Alias Setup
IP Alias 1= Yes
IP Address= 192.168.2.1
IP Subnet Mask= 255.255.255.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
Figure 3-5 Menu 3.2.1 — IP Alias Setup

Table 3-3 IP Alias Setup Menu Fields

DESCRIPTION EXAMPLE
Yes
192.168.2.1
255.255.255.0
None
(default)
RIP-1
(default)
N/A
N/A
Internet Access