ZyXEL Communications Prestige 645R User Manual page 62

FIELD
Rem Node Name
Active
Encapsulation=
Multiplexing=
Incoming: Rem
Login
Name
Incoming: Rem
Password
Outgoing: My Login
Outgoing: My
Password
Outgoing: Authen
Route
Remote Node Configuration
This is a required field [?]. Enter a descriptive name for the
remote node, for example, "Changeme". This field can be up to
eight characters. This name must be unique from any other
remote node name.
Press the [SPACE BAR] to select either Yes or No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in menu 11.
PPP refers to RFC 2364, "PPP Encapsulation over ATM
Adaptation Layer 5". If RFC 1483 ("Multiprotocol Encapsulation
over ATM Adaptation Layer 5") or ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My
Password, Edit PPP Options and Authen fields will not be
applicable (N/A). Moreover, ENET ENCAP encapsulation does
not apply for IPX routing.
Press the [SPACE BAR] to select either VC-based or
LLC-based multiplexing.
Enter the login name that this remote node will use when it calls
your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Enter the password used when this remote node calls your
Prestige.
Enter the login name for your Prestige when it calls this remote
node.
Enter the password for your Prestige when it calls this remote
node.
This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP - accept CHAP only.
PAP - accept PAP only.
This field determines the protocols that your Prestige will route.
Options are IP, IPX, IP+!PX and None; although with ENET
Prestige P645 ADSL Internet Access Router
DESCRIPTION EXAMPLE
Changeme
No
PPP
LLC-based
bucket
***
oscar
***
CHAP/PAP
IP
4-3