Ip Alias Setup; Figure 144 Physical Network & Partitioned Logical Networks; Figure 145 Menu 3.2.1: Ip Alias Setup; Table 102 Menu 3.2.1: Ip Alias Setup - ZyXEL Communications PRESTIGE 335 User Manual

P-335 Series User's Guide

26.3.1 IP Alias Setup

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for each LAN network.
Figure 144 Physical Network & Partitioned Logical Networks
You must use menu 3.2 to configure the first network. Move the cursor to the Edit IP Alias field, press
[SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.
Press [ENTER] to open Menu 3.2.1 - IP Alias Setup, as shown next.

Figure 145 Menu 3.2.1: IP Alias Setup

Use the instructions in the following table to configure IP alias parameters.

Table 102 Menu 3.2.1: IP Alias Setup

FIELD
IP Alias 1, 2
IP Address
302
Menu 3.2.1 - IP Alias Setup
IP Alias 1= Yes
IP Address=
IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
Choose Yes to configure the LAN network for the Prestige.
Enter the IP address of your Prestige in dotted decimal notation.
Chapter 26 Menu 3 LAN Setup