Ip Alias Setup; Figure 146 Physical Network & Partitioned Logical Networks; Figure 147 Menu 3.2.1: Ip Alias Setup; Table 101 Menu 3.2.1: Ip Alias Setup - ZyXEL Communications P-335WT User Manual

P-335 Series User's Guide

25.3.1 IP Alias Setup

IP alias allows you to partition a physical network into different logical networks over the
same Ethernet interface. The Prestige supports three logical LAN interfaces via its single
physical Ethernet interface with the Prestige itself as the gateway for each LAN network.
Figure 146 Physical Network & Partitioned Logical Networks
You must use menu 3.2 to configure the first network. Move the cursor to the Edit IP Alias field, press
[SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.
Press [ENTER] to open Menu 3.2.1 - IP Alias Setup, as shown next.

Figure 147 Menu 3.2.1: IP Alias Setup

Use the instructions in the following table to configure IP alias parameters.

Table 101 Menu 3.2.1: IP Alias Setup

FIELD
IP Alias 1, 2
IP Address
294
Menu 3.2.1 - IP Alias Setup
IP Alias 1= Yes
IP Address=
IP Subnet Mask= 0.0.0.0
RIP Direction= None
Version= RIP-1
Incoming protocol filters=
Outgoing protocol filters=
IP Alias 2= No
IP Address= N/A
IP Subnet Mask= N/A
RIP Direction= N/A
Version= N/A
Incoming protocol filters= N/A
Outgoing protocol filters= N/A
Enter here to CONFIRM or ESC to CANCEL:
DESCRIPTION
Choose Yes to configure the LAN network for the Prestige.
Enter the IP address of your Prestige in dotted decimal notation.
Chapter 25 Menu 3 LAN Setup