Figure 3-7 Internet Access Setup; Table 3-5 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 645R User Manual

y
J
FIELD
ISP's Name
Encapsulation
Multiplexing
VPI #
VCI #
Service Name
My Login
My Password
Single User Account
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 10
VCI #= 10
Service Name=
My Login= tarbuck
My Password= *********
Single User Account= Yes
IP Address Assignment= Static
IP Address= 0.0.0.0
ENET ENCAP Gateway= 0.0.0.0
Press ENTER to confirm or ESC to cancel:

Figure 3-7 Internet Access Setup

Table 3-5 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g.,
MyISP. This information is for identification purposes only.
Press the [SPACE BAR] to select the method of
encapsulation used by your ISP. The choices are PPP,
RFC 1483, PPPoE or ENET ENCAP. Please see section
3.9 for related information.
Press the [SPACE BAR] to select the method of
multiplexing used by your ISP - either VC-based or LLC-
based.
Enter the Virtual Path Identifier (VPI) that the telephone
company gives you.
Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you.
Only available when PPPoE encapsulation is used. Enter
the name of your PPPoE service provider. This is the same
as PPPoE Service Name in menu 11.1.
Enter the login name that your ISP gives you.
Enter the password associated with the login name above.
Press the [SPACE BAR] to enable or disable SUA. Please
see the following section for a more detailed discussion on
Prestige 645 ADSL Internet Access Router
DESCRIPTION
Get the VPI and
VCI from your
telephone
company and the
other
information from
your ISP.
EXAMPLE
MyISP
PPP
VC-based
10
10
tarbuck
***
No
3-13