Chapter 29 Troubleshooting; Problems Starting Up The Zyxel Device; Problems With The Lan; Table 136 Troubleshooting Starting Up Your Device - ZyXEL Communications P-2608HWL-Dx Series User Manual

802.11g wireless adsl2+ voip iad
Hide thumbs Also See for P-2608HWL-Dx Series:
Table of Contents

Advertisement

This chapter covers potential problems and the corresponding remedies.

29.1 Problems Starting Up the ZyXEL Device

Table 136 Troubleshooting Starting Up Your Device

PROBLEM
None of the
lights turn on
when I turn on
the ZyXEL
Device.

29.2 Problems with the LAN

Table 137 Troubleshooting the LAN

PROBLEM
I cannot access
the ZyXEL
Device from the
LAN.

Chapter 29 Troubleshooting

CORRECTIVE ACTION
Make sure that the ZyXEL Device's power adaptor is connected to the ZyXEL Device
and plugged in to an appropriate power source. Make sure that the ZyXEL Device and
the power source are both turned on.
Turn the ZyXEL Device off and on.
If the error persists, you may have a hardware problem. In this case, you should
contact your vendor.
CORRECTIVE ACTION
If Any IP is disabled, make sure that the IP address and the subnet mask of the
ZyXEL Device and your computer(s) are on the same subnet.
P-2608HWL-Dx Series User's Guide
C
H A P T E R
Troubleshooting
2 9
349

Advertisement

Table of Contents
loading

This manual is also suitable for:

P-2608hwl-d1

Table of Contents