Automatically Assign A Wpa Key; Manually Assign A Wpa Key; Manually Assign A Wep Key; Figure 24 Manually Assign A Wpa Key - ZyXEL Communications P-2608HWL-Dx Series User Manual

4 This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click Next.

3.3.1 Automatically assign a WPA key

Choose Manually assign a WPA key in the Wireless LAN setup screen to allow the ZyXEL
Device to configure a PSK key for you based on the setup key you entered on the previous
Wireless LAN setup screen. This key acts like a password to ensure only those Wireless LAN
devices you authorize are configured by OTIST.

3.3.2 Manually Assign a WPA key

Choose Manually assign a WPA key in the Wireless LAN setup screen to set up a Pre-
Shared Key.

Figure 24 Manually Assign a WPA key

The following table describes the labels in this screen.

Table 12 Manually Assign a WPA key

LABEL
Pre-Shared
Key
Back
Next
Exit

3.3.3 Manually Assign a WEP key

Choose Manually assign a WEP key to setup WEP Encryption parameters.
Chapter 3 Internet and Wireless Setup Wizard
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-2608HWL-Dx Series User's Guide
63