Manual Configuration; Figure 12 Auto-Detection: Pppoe; Figure 13 Auto Detection: Failed - ZyXEL Communications P-2608HWL-Dx Series User Manual

Figure 12 Auto-Detection: PPPoE

Figure 13 Auto Detection: Failed

3.2.1 Manual Configuration

1 If the ZyXEL Device fails to detect your DSL connection type but the physical line is
connected, enter your Internet access information in the wizard screen exactly as your
SIP gave it to you. Leave the defaults in any fields for which you were not given
information.
Chapter 3 Internet and Wireless Setup Wizard
c
The following screen appears if the ZyXEL Device detects a connection but
not the connection type. Click Next and refer to
how to manually configure the ZyXEL Device for Internet access.
P-2608HWL-Dx Series User's Guide
Section 3.2.1 on page 55 on
55