ICP DAS USA MDC-700 Series User Manual page 17

Modbus Connection
The Modbus Connection section is used to configure the Modbus ID of the MDC module and the
TCP/IP Port number for Modbus TCP communication.
# TCPPort
* 502
TCPPort: Defines the TCP/IP Port number, in the example set to 502.
ModbusID: Defines the Modbus ID of the MDC module, in the example set to 1.
Module Information
The Module Information section is used to record relative information for the MDC module. It will be
displayed on the main page of the MDC‐700, and can be used to one MDC module from the others.
# ModuleInfo
* this is my data concentrator
ModuleInfo: Define the relative information for the MDC module. The string constant has a
maximum length of 32 characters.
Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E‐mail: service@icpdas.com ‐ 17 ‐
ModbusID
1