Aastra 400 Series User Manual page 56

DECT Measuring Device ME-8 (test kit)
Detail Display of "Connection Quality"
Pressing the "i" key from the standard display takes you to the "Connection quality"
detail display. It contains additional connection information (except in "scan" and
"srch" status) in the 2nd line:
Field strength minimum of the last couple of measurements
Filtered field strength display (RSSI)
Fig. 26 2nd line of the "Connection quality" detail display in "Look Around Mode"
56
2. line: Detail display of connection quality
Selected antenna of the test radio unit:
"i" : Internal antennas, antenna diversity switched on
"e" : External antennas, antenna diversity switched on
"i1" : Internal antenna 1, antenna diversity switched off
"i2" : Internal antenna 2, antenna diversity switched off
"e1": External antenna 1, antenna diversity switched off
"e2": External antenna 2, antenna diversity switched off
Displayed when more than 99 CRC errors have been registered
Counter of the CRC errors (0..99) (CRC = Cyclic Redundancy Check
(can be reset with the "#" key)
Field strength minimum since the connection was established
(can be reset with the "#" key)
Planning Aastra 400 DECT systems as of R1.0
syd-0457/1.0 – R1.0 – 10.2012