Restore Configuration; Example: Restore Configuration Using Hyperterminal; Figure 10-5 System Maintenance - Restore Configuration; Figure 10-6 Example: Restore Configuration - ZyXEL Communications ZyXEL ZYWALL10 User Manual

ZyWALL 10 Internet Security Gateway

10.3 Restore Configuration

Menu 24.6 -- System Maintenance - Restore Configuration allows you to restore the configuration via
the console port.
FTP and TFTP are the preferred methods for restoring your current workstation configuration to your
ZyWALL since FTP and TFTP are faster. Please note that the system reboots automatically after the file
transfer is complete.
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Figure 10-5 System Maintenance — Restore Configuration

10.3.1 Example: Restore Configuration Using HyperTerminal

In menu 24.6 press y to continue.
Run the HyperTerminal program. Click Transfer, then Send File to display the following screen.
10-4

Figure 10-6 Example: Restore Configuration

Type the rom
configuration file's
location, or use Browse
to search for it.
Choose the Xmodem
protocol.
Then click Send.
Firmware and Configuration File Maintenance