ZyWALL 10 Internet Security Gateway
The following table describes the SNMP configuration parameters.
FIELD
Get
Community
Set
Community
Trusted Host
Trap
Community
Destination
Once you have completed filling in Menu 22 - SNMP Configuration, press [ENTER] at the
message "Press ENTER to Confirm" to save your configuration, or press [ESC] to cancel.
8-2
Table 8-1 SNMP Configuration Menu Fields
Enter the get community, which is the password for the
incoming Get- and GetNext- requests from the management
station.
Enter the set community, which is the password for incoming
Set- requests from the management station.
If you enter a trusted host, your ZyWALL will only respond to
SNMP messages from this address. If you leave the field blank
(default), your ZyWALL will respond to all SNMP messages it
receives, regardless of source.
Enter the trap community, which is the password sent with each
trap to the SNMP manager.
Enter the IP address of the station to send your SNMP traps to.
DESCRIPTION
DEFAULT
public
public
blank
public
0.0.0.0
SNMP