Figure 3-6 Menu 4 - Internet Access Setup (Ethernet); Table 3-4 Internet Access Setup Menu Fields - ZyXEL Communications ZyXEL ZYWALL10 User Manual

The following table describes this screen.
FIELD
ISP's Name
Encapsulation
Service Type
Note: xDSL users must choose the Standard option only. The Server IP, My Login IP and My
Password fields are not applicable in this case.
My Login Name
My Password
Login Server IP
IP Address Assignment
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel:
Figure 3-6 Menu 4 — Internet Access Setup (Ethernet)

Table 3-4 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
Press [SPACE BAR] and then press [ENTER] to choose Ethernet. The
encapsulation method influences your choices for IP Address.
Press the [SPACE BAR] to select Standard, RR-Toshiba (RoadRunner
Toshiba authentication method) or RR-Manager (RoadRunner Manager
authentication method). Choose a RoadRunner flavor if your ISP is Time
Warner's RoadRunner; otherwise choose Standard.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
The ZyWALL will find the RoadRunner Server IP if this field is left blank. If it
does not, then you must enter the authentication server IP address.
If your ISP did not assign you a fixed IP address, select Dynamic, otherwise
select Static and enter the IP address & subnet mask in the following fields.
ZyWALL 10 Internet Security Gateway
DESCRIPTION
3-9