Wan Setup; Table 2-5 Configure Dynamic Dns Menu Fields - ZyXEL Communications ZyXEL ZYWALL10 User Manual

Internet security gateway
Hide thumbs Also See for ZyXEL ZYWALL10:
Table of Contents

Advertisement

ZyWALL 10 Internet Security Gateway
FIELD
Service
Provider
Active
Host
EMAIL
User
Password
Enable
Wildcard
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..."
to save your configuration, or press [ESC] at any time to cancel.
The IP address will be updated when you reconfigure Menu 1 or perform DHCP client renewal.
If you have a private WAN IP address, then you cannot use Dynamic DNS.
2.8

WAN Setup

This section describes how to configure the WAN using Menu 2 — WAN Setup. From the main menu,
enter 2 to open menu 2.
ZyXEL recommends you configure this menu even if your ISP does not require MAC
2-12

Table 2-5 Configure Dynamic DNS Menu Fields

Enter the name of your Dynamic DNS client.
Press [SPACE BAR] to cycle between Yes or No.
Enter the domain name assigned to your ZyWALL by your
Dynamic DNS provider.
Enter your e-mail address.
Enter your user name.
Enter the password assigned to you.
Your ZyWALL supports DYNDNS Wildcard. Press [SPACE
BAR] to cycle between Yes or No This field is N/A when you
choose DDNS client as your service provider.
address authentication.
DESCRIPTION
www.dyndns.org
me.dyndns.org
mail@mailserver
Hardware Installation & Initial Setup
EXAMPLE
Yes
Yes

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 10

Table of Contents