Figure 3-8 Internet Access Setup (Pppoe); Table 3-6 New Fields In Menu 4 (Pppoe) Screen - ZyXEL Communications ZyXEL ZYWALL10 User Manual

ZyWALL 10 Internet Security Gateway
known as dynamic service selection. This enables the service provider to easily create and offer new IP
services for specific users.
Operationally, PPPoE saves significant effort for both the end user and ISP/carrier, as it requires no specific
configuration of the broadband modem at the customer site.
By implementing PPPoE directly on the ZyWALL 10 (rather than individual computer's), the computers on
the LAN do not need PPPoE software installed, since the ZyWALL does that part of the task. Furthermore,
with NAT, all of the LAN's computers will have access.
If you enable PPPoE in menu 4, you will see the next screen. For more information on PPPoE, please see the
Appendices.
FIELD
Encapsulation
Idle Timeout
If you need a PPPoE service name to identify and reach the PPPoE server, please go to menu 11 and enter the
PPPoE service name provided to you in the Service Name field.
3-12
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= PPPoE
Service Type=
My Login=
My Password= ********
Idle Timeout= 100
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel:

Figure 3-8 Internet Access Setup (PPPoE)

Table 3-6 New Fields in Menu 4 (PPPoE) screen

Press the [SPACE BAR] and then press [ENTER] to choose PPPoE.
The encapsulation method influences your choices for IP Address.
This value specifies the time in seconds that elapses before the
ZyWALL automatically disconnects from the PPPoE server.
DESCRIPTION EXAMPLE
PPPoE
100
(default)
Internet Access