Example: Xmodem Upload Using Hyperterminal; Uploading Router Configuration File; Figure 10-10 Menu 24.7.1 - System Maintenance - Upload Router Firmware; Figure 10-11 Example: Xmodem Upload - ZyXEL Communications ZyXEL ZYWALL10 User Manual

ZyWALL 10 Internet Security Gateway
Step 4. After successful firmware upload, enter atgo to restart the ZyWALL.
Figure 10-10 Menu 24.7.1 — System Maintenance — Upload Router Firmware

10.4.2 Example: Xmodem Upload Using HyperTerminal

Click Transfer, then Send File to display the following screen.

10.4.3 Uploading Router Configuration File

The configuration data, system-related data, the error log and the trace log are all stored in the configuration
file. Please be aware that uploading the configuration file replaces everything contained within.
10-6
Menu 24.7.1 - System Maintenance - Upload Router Firmware
To upload router firmware:
1. Enter "y" at the prompt below to go into debug mode.
2. Enter "atur" after "Enter Debug Mode" message.
3. Wait for "Starting XMODEM upload" message before activating
Xmodem upload on your terminal.
4. After successful firmware upload, enter "atgo" to restart the
router.
Warning: Proceeding with the upload will erase the current router
firmware.
Do You Wish To Proceed:(Y/N)

Figure 10-11 Example: Xmodem Upload

Type the bin firmware
file's location, or click
Browse to look for it.
Choose the Xmodem
protocol.
Then click Send.
Firmware and Configuration File Maintenance