Figure 11-6 Menu 24 - System Maintenance; Figure 11-7 Menu 24.10 System Maintenance - Time And Date Setting - ZyXEL Communications ZyXEL ZYWALL10 User Manual

Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Then enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time
and date settings of your ZyWALL as shown in the following screen.
Figure 11-7 Menu 24.10 System Maintenance — Time and Date Setting
System Maintenance & Information
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
Figure 11-6 Menu 24 — System Maintenance
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time:
New Time (hh:mm:ss):
Current Date:
New Date (yyyy-mm-dd):
Time Zone= GMT+0800
Daylight Saving= No
Start Date (mm-dd):
End Date (mm_dd):
Press ENTER to Confirm or ESC to Cancel:
ZyWALL 10 Internet Security Gateway
00 : 00 : 00
11 : 23 : 16
2000 - 01 - 01
2001 - 03 - 01
01 – 00
01 – 00
11-5