2.5.2 System Management Terminal Interface Summary
NO.
MENU TITLE
1
General Setup
2
WAN Setup
3
Ethernet Setup
4
Internet Access Setup
11
Remote Node Setup
12
Static Routing Setup
15
NAT Setup
21
Filter and Firewall Setup
22
SNMP Configuration
23
System Password
24
System Maintenance
26
Schedule Setup
99
Exit
Hardware Installation & Initial Setup
Table 2-3 Main Menu Summary
Use this menu to set up routing/bridging and general information.
Use this menu to clone a MAC address from a computer on your LAN.
Use this menu to configure LAN DHCP and TCP/IP settings as well as
apply LAN filters.
Configure your Internet Access setup (Internet address, gateway, login,
etc.) with this menu.
Use this menu to configure detailed remote node settings (your ISP is
also a remote node) as well as apply WAN filters.
Configure static routes for bridging and IP in this menu.
Use this menu to configure Network Address Translation.
Configure filters, activate/deactivate the firewall and view the firewall log.
Use this menu to configure SNMP-related parameters.
Change your password in this menu (recommended).
From displaying system status to uploading firmware, this menu provides
comprehensive system maintenance.
Use this menu to schedule outgoing calls.
Use this menu to exit (necessary for remote configuration).
ZyWALL 10 Internet Security Gateway
FUNCTION
2-7