Figure 32 Station Mode: Profile: Select A Channel; Table 13 Station Mode: Profile: Select A Channel - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

ZyXEL G-120 User's Guide

Figure 32 Station Mode: Profile: Select a Channel

The following table describes the labels in this screen.

Table 13 Station Mode: Profile: Select a Channel

LABEL
Wireless Settings
Channel
Wireless Mode
3 If you select Infrastructure network type in the first screen, select WEP, WPA-PSK,
WPA, WPA2-PSK, WPA2 or 802.1x to enable data encryption. If you select Ad-Hoc
network type in the first screen, you can only use WEP encryption method. Otherwise,
select Disabled to allow the G-120 to communicate with the access points or other peer
wireless computers without any data encryption and skip to step 5.
56
DESCRIPTION
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
This displays b+g and allows the G-120 to connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.
Chapter 4 Wireless Station Mode Configuration