The Profile Screen; Figure 29 Station Mode: Confirm New Settings; Table 10 Station Mode: Confirm New Settings - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

ZyXEL G-120 User's Guide

Figure 29 Station Mode: Confirm New Settings

The following table describes the labels in this screen.

Table 10 Station Mode: Confirm New Settings

LABEL
Network (SSID)
Network Type
Security
Back
Save
Exit

4.4 The Profile Screen

A profile is a set of wireless parameters that you need to connect to a wireless network. With a
profile activated, each time you start the G-120, it automatically scans for the specific SSID
and joins that network with the pre-defined wireless security settings. If the specified network
is not available, the G-120 cannot connect to a network.
If you do not configure and activate a profile, each time you start the G-120, the G-120 uses
the default profile to connect to any available network with security disabled.
The default profile is a profile that allows you to connect to any SSID without security.
Click the Profile tab in the ZyXEL utility program to display the Profile screen as shown next.
The profile function allows you to save the wireless network settings in this screen, or use one
of the pre-configured network profiles.
52
DESCRIPTION
This field displays the SSID previously entered.
This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
WPA2, WPA2-PSK, 802.1x) or inactive (Disabled).
Click Back to return to the previous screen.
Click Save to save the changes back to the G-120 and display the Link Info
screen.
Click Exit to discard changes and return to the Site Survey screen.
Chapter 4 Wireless Station Mode Configuration