Figure 30 Profile: Wireless Setting: Select A Channel - ZyXEL Communications M-302 User Manual

M-302 User's Guide
Table 14 Profile: Add New Profile (continued)
LABEL
Network Type
Next
Exit
Scan Info
SSID
Scan
Select
2 If you selected the Infrastructure network type in the previous screen, skip to step 3. If
you selected the Ad-Hoc network type in the previous screen, a screen displays as
follows. Select a channel number and click Next to continue.

Figure 30 Profile: Wireless Setting: Select a Channel

46
DESCRIPTION
Select Infrastructure to associate to an AP. Select Ad-Hoc to associate to a
peer computer
Click Next to go to the next screen.
Click Exit to go back to the previous screen without saving.
This table displays the information of the available wireless networks within
the transmission range.
denotes that the wireless device is in infrastructure mode and
the wireless security is activated.
denotes that the wireless device is in infrastructure mode but
the wireless security is deactivated.
denotes that the wireless device is in Ad-Hoc mode and the
wireless security is activated.
denotes that the wireless device is in Ad-Hoc mode but the
wireless security is deactivated.
This field displays the SSID (Service Set IDentifier) of each AP or peer
device.
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to
this profile.
Whenever you activate this profile, the M-302 associates to the selected
wireless network only.
Chapter 4 ZyXEL Utility Configuration