Hardware And Utility Installation; Zyxel Utility Icon; Configuration Methods; Enabling Wzc - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

ZyXEL G-120 User's Guide
1.2.4 G-120 Hardware and Utility Installation
Follow the instructions in the Quick Start Guide to install the ZyXEL utility and make
hardware connections.

1.3 ZyXEL Utility Icon

After you install and start the ZyXEL utility, an icon for the ZyXEL utility appears in the
system tray.
Note: The ZyXEL utility system tray icon displays only when the G-120 is installed
properly.
When you use the ZyXEL utility, it automatically disables WZC.

Figure 5 ZyXEL Utility: System Tray Icon

The color of the ZyXEL utility system tray icon indicates the status of the G-120. Refer to the
following table for details.

Table 1 ZyXEL Utility: System Tray Icon

COLOR
Red
Green
Pale Blue

1.4 Configuration Methods

To configure your G-120, use one of the following applications:
• Wireless Zero Configuration (WZC) (the Windows XP wireless configuration tool)
• ZyXEL Utility

1.4.1 Enabling WZC

Note: When you use the ZyXEL utility, it automatically disables WZC.
If you want to use WZC to configure the G-120, you need to disable the ZyXEL utility by
right-clicking the utility icon (
my wireless network settings.
24
DESCRIPTION
The G-120 is not connected to a wireless network or is searching for an available
wireless network.
The G-120 is connected to a wireless network.
The G-120 is operating in access point mode.
) in the system tray and selecting Use Windows to configure
Chapter 1 Getting Started