Figure 22 Profile: Wireless Setting: Select A Channel; Table 13 Profile: Wireless Setting: Select A Channel - ZyXEL Communications M-102 User Manual

Table 12 Profile: Add New Profile (continued)
LABEL
Scan
Select
2 If you select the Infrastructure network type in the previous screen, skip to step 3. If you
select the Ad-Hoc network type in the previous screen, a screen displays as follows.
Select a channel number and wireless LAN mode and click Next to continue.

Figure 22 Profile: Wireless Setting: Select a Channel

The following table describes the labels in this screen.

Table 13 Profile: Wireless Setting: Select a Channel

LABEL
Wireless Setting
Wireless Mode
Channel
Back
Next
Exit
Chapter 3 ZyXEL Utility Configuration
DESCRIPTION
Click Scan to search for available wireless devices within transmission range.
Select an available wireless device in the table and click Select to add it to this
profile.
Whenever you activate this profile, the M-102 associates to the selected wireless
network only.
DESCRIPTION
Select 802.11g to have the M-102 connect to an IEEE 802.11g wireless device
only and vice versa.
Select 802.11b to have the M-102 connect to an IEEE 802.11b wireless device
only and vice versa.
Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Click Back to return to the Add New Profile screen.
Click Next to confirm your selection and advance to the Encryption Type screen.
Click Exit to discard changes and return to the Add New Profile screen.
ZyXEL M-102 User's Guide
45