Changing G-120 Mode; Figure 3 Application: Access Point Mode; Figure 4 Zyxel Utility: Change Modes - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

Figure 3 Application: Access Point Mode

In the example, the G-120 is installed on computer A and set to operate in access point mode.
Computer A provides an Internet connection to the wireless LAN, so wireless stations B and C
can access the Internet.
Note: If the computer in which the G-120 is installed uses WZC (Wireless Zero
Configuration), the G-120 cannot function as an AP.

1.2.3 Changing G-120 Mode

To change between the modes, select either Station Mode or AP Mode in any ZyXEL utility
screen.

Figure 4 ZyXEL Utility: Change Modes

Note: Wait for about five seconds for the ZyXEL utility to complete the mode change.
The current mode is indicated by the color of the check box, see
page
Chapter 1 Getting Started
24.
ZyXEL G-120 User's Guide
Section 1.3 on
23