Table 8 Station Mode: Security Setting: Wpa/Wpa2 - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

802.11g wireless cardbus card
Hide thumbs Also See for ZyXEL ZyAIR G-120:
Table of Contents

Advertisement

ZyXEL G-120 User's Guide
The following table describes the labels in this screen.

Table 8 Station Mode: Security Setting: WPA/WPA2

LABEL
Encryption Type
Authentication
Type
Login Name
Password
Certificate
Validate Server
Certificate
PEAP Inner EAP
Back
Next
Exit
4.3.1.4 802.1x
Configure IEEE 802.1x security with various authentication methods in this screen.
50
DESCRIPTION
The encryption mechanisms used for WPA/WPA2 and WPA-PSK/WPA2-PSK are
the same. The only difference between the two is that WPA-PSK/WPA2-PSK uses
a simple common password, instead of user-specific credentials.
Select the encryption type (TKIP or AES) for data encryption.
Refer to
Section 3.2.3.3 on page 38
The type of authentication you use depends on the RADIUS server or AP.
Select an authentication method from the drop down list. Options are TLS and
PEAP.
Enter a user name.
This is the user name that you or an administrator set up on a RADIUS server.
This field is not available when you select TLS in the Authentication Type field.
Enter the password associated with the user name above.
This field is only available when you select TLS in the Authentication Type field.
Select a certificate used by the authentication server to authenticate the G-120.
Note: You must first have a wired connection to a network and
obtain the certificate(s) from a certificate authority (CA).
Consult your network administrator for more information.
Select the check box to check the certificate of the authentication server.
This field is only available when you select PEAP in the Authentication Type field.
The PEAP method used by the RADIUS server or AP for client authentication is
MS CHAP v2.
Click Back to go to the Site Survey screen to select and connect to another
network.
Click Next to confirm your selections and advance to the Confirm New Settings
screen. Refer to
Section 4.3.2 on page
Click Exit to return to the Site Survey screen without saving.
for more information.
51.
Chapter 4 Wireless Station Mode Configuration

Advertisement

Table of Contents
loading

Table of Contents