Figure 59 Windows Xp: Wireless (Network) Properties: Authentication; Table 28 Windows Xp: Wireless (Network) Properties: Authentication - ZyXEL Communications ZyXEL ZyAIR G-120 User Manual

Authentication
Click the Authentication tab in the Wireless (network) properties screen to display the
screen shown next. The fields on this screen are grayed out when the network is in Ad-Hoc
mode or data encryption is disabled.

Figure 59 Windows XP: Wireless (network) properties: Authentication

The following table describes the labels in this screen.

Table 28 Windows XP: Wireless (network) properties: Authentication

LABEL
Enable IEEE
802.1x
authentication for
this network
EAP Type
Properties
Authenticate as
computer when
computer
information is
available
Authenticate as
guest when user
or computer
information is
unavailable
OK
Cancel
Appendix C Management with Wireless Zero Configuration
DESCRIPTION
This field displays whether the IEEE 802.1x authentication is active.
If the network authentication is set to Open in the previous screen, you can choose
to disable or enable this feature.
Select the type of EAP authentication. Options are Protected EAP (PEAP) and
Smart Card or other Certificate.
Click this button to open the properties screen and configure certificates. The
screen varies depending on what you select in the EAP type field.
Select this check box to have the computer send its information to the network for
authentication when a user is not logged on.
Select this check box to have the computer access to the network as a guest when
a user is not logged on or computer information is not available.
Click OK to save your changes.
Click Cancel to leave this screen without saving any changes you may have made.
ZyXEL G-120 User's Guide
85