Figure 137 Bandwidth Management: Rule Setup; Table 100 Bandwidth Management: Rule Setup - ZyXEL Communications P-661HW User Manual

P-661H/HW Series User's Guide

Figure 137 Bandwidth Management: Rule Setup

The following table describes the labels in this screen.

Table 100 Bandwidth Management: Rule Setup

LABEL
Direction
Service
Priority
Bandwidth
Add
#
Active
Rule Name
Destination Port
Priority
Bandwidth (kbps)
Modify
Apply
Cancel
242
DESCRIPTION
Select the direction of traffic to which you want to apply bandwidth management.
Select a service for your rule or you can select User define to go to the screen
where you can define your own.
Select a priority from the drop down list box. Choose High, Mid or Low.
Specify the maximum bandwidth allowed for the rule in kbps. The
recommendation is a setting between 20 kbps and 20000 kbps for an individual
rule.
Click this button to add a rule to the following table.
This is the number of an individual bandwidth management rule.
This displays whether the rule is enabled. Select this check box to have the
ZyXEL Device apply this bandwidth management rule.
Enable a bandwidth management rule to give traffic that matches the rule priority
over traffic that does not match the rule.
Enabling a bandwidth management rule also allows you to control the maximum
amounts of bandwidth that can be used by traffic that matches the rule.
This is the name of the rule.
This is the port number of the destination. 0 means any destination port.
This is the priority of this rule.
This is the maximum bandwidth allowed for the rule in kbps.
Click the Edit icon to go to the screen where you can edit the rule.
Click the Remove icon to delete an existing rule.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 15 Bandwidth Management