Note: The wireless stations and ZyXEL Device must use the same SSID, channel ID
and WEP encryption key (if WEP is enabled), WPA-PSK (if WPA-PSK is
enabled) for wireless communication.
4 This screen varies depending on the security mode you selected in the previous screen.
Fill in the field (if available) and click Next.
3.2.1 Manually assign a WPA-PSK key
Choose Manually assign a WPA-PSK key in the Wireless LAN setup screen to set up a Pre-
Shared Key.
Figure 30 Manually assign a WPA key
The following table describes the labels in this screen.
Table 18 Manually assign a WPA key
LABEL
Pre-Shared
Key
Back
Next
Exit
3.2.2 Manually assign a WEP key
Choose Manually assign a WEP key to setup WEP Encryption parameters.
Chapter 3 Wizards
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
P-661H/HW Series User's Guide
69