Configuring Port Forwarding; Figure 73 Multiple Servers Behind Nat Example; Figure 74 Port Forwarding - ZyXEL Communications P-661HW User Manual

Figure 73 Multiple Servers Behind NAT Example

7.5 Configuring Port Forwarding

Note: The Port Forwarding screen is available only when you select SUA Only in
the NAT > General screen.
If you do not assign a Default Server IP address, the ZyXEL Device discards
all packets received for ports that are not specified here or in the remote
management setup.
Click Network > NAT > Port Forwarding to open the following screen.
See Table 51 on page 138

Figure 74 Port Forwarding

Chapter 7 Network Address Translation (NAT) Screens
for port numbers commonly used for particular services.
P-661H/HW Series User's Guide
139