Figure 6 Password Screen; Figure 7 Change Password At Login - ZyXEL Communications P-661HW User Manual

P-661H/HW Series User's Guide
status only. Click Login to proceed to a screen asking you to change your password or
click Cancel to revert to the default password.

Figure 6 Password Screen

6 If you entered the user password, skip the next two steps and refer to
page 51
7 If you entered the admin password, it is highly recommended you change the default
admin password! Enter a new password between 1 and 30 characters, retype it to confirm
and click Apply; alternatively click Ignore to proceed to the main menu if you do not
want to change the password now.
Note: If you do not change the password at least once, the following screen appears
every time you log in with the admin password.

Figure 7 Change Password at Login

8 The next screen depends on which password (admin or user) you used in step 5. Select
Go to Wizard setup, and click Apply to display the wizard main screen. Select Go to
Advanced setup or View Device Status, and click Apply to display the Status screen.
Select Change Password if you want to change the user password.
46
for more information about the Status screen.
Chapter 2 Introducing the Web Configurator
Section 2.4.2 on