Static Route Edit; Figure 133 Static Route; Table 91 Static Route - ZyXEL Communications P-661HW User Manual

P-661H/HW Series User's Guide

Figure 133 Static Route

The following table describes the labels in this screen.

Table 91 Static Route

LABEL
#
Active
Name
Destination
Gateway
Subnet Mask
Modify

14.2.1 Static Route Edit

Select a static route index number and click Edit. The screen shown next appears. Use this
screen to configure the required information for a static route.
232
DESCRIPTION
This is the number of an individual static route.
This field shows whether this static route is active (Yes) or not (No).
This is the name that describes or identifies this route.
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
This is the subnet mask of the static route.
Click the edit icon to go to the screen where you can set up a static route on the
ZyXEL Device.
Click the delete icon to remove a static route from the ZyXEL Device. A window
displays asking you to confirm that you want to delete the route.
Chapter 14 Static Route