Wpa/Wpa2; Figure 58 Wireless: Wpa/Wpa2 - ZyXEL Communications P-661HW User Manual

Table 39 Wireless: WPA-PSK/WPA2-PSK
LABEL
Group Key Update
Timer (In
Seconds)
Apply
Cancel
Advanced Setup

6.4.4 WPA/WPA2

In order to configure and enable WPA/WPA2; click the Wireless LAN link under Network to
display the General screen. Select WPA or WPA2 from the Security Mode list.

Figure 58 Wireless: WPA/WPA2

Chapter 6 Wireless LAN
DESCRIPTION
The Group Key Update Timer is the rate at which the AP (if using WPA-PSK/
WPA2-PSK key management) or RADIUS server (if using WPA(2) key
management) sends a new group key out to all clients. The re-keying process is
the WPA(2) equivalent of automatically changing the WEP key for an AP and all
stations in a WLAN on a periodic basis. Setting of the Group Key Update Timer is
also supported in WPA-PSK/WPA2-PSK mode. The default is 1800 seconds (30
minutes).
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Click Advanced Setup to display the Wireless Advanced Setup screen and edit
more details of your WLAN setup.
P-661H/HW Series User's Guide
117