Dhcp Setup; Figure 50 Dhcp Setup - ZyXEL Communications P-661HW User Manual

Table 31 Advanced LAN Setup (continued)
LABEL
Windows
Networking
(NetBIOS over
TCP/IP)
Allow between
LAN and WAN
Back
Apply
Cancel

5.4 DHCP Setup

Use this screen to configure the DNS server information that the ZyXEL Device sends to the
DHCP client devices on the LAN.

Figure 50 DHCP Setup

Chapter 5 LAN Setup
DESCRIPTION
NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that
enable a computer to connect to and communicate with a LAN. For some dial-up
services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.
However it may sometimes be necessary to allow NetBIOS packets to pass through
to the WAN in order to find a computer on the WAN.
Select this check box to forward NetBIOS packets from the LAN to the WAN and
from the WAN to the LAN. If your firewall is enabled with the default policy set to
block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall
rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the WAN
and from the WAN to the LAN.
Click Back to return to the previous screen.
Click Apply to save the changes.
Click Cancel to begin configuring this screen afresh.
P-661H/HW Series User's Guide
103