Table of Contents
Advertisement
Prestige 623ME-T User's Guide
17.4.2 How to configure NAT
From menu 4, choose the SUA Only option from the Network Address Translation field. This is the
Many-to-One mapping discussed in section 17.4. The SUA Only read-only option from the Network
Address Translation field in menus 4 and 11.3 is specifically pre-configured to handle this case.
17-4
Figure 17-4 Configuring NAT
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 17-5 Configuring NAT SMT Menus
NAT
Advertisement
Table of Contents
