Table of Contents
Advertisement
Rem Node Name= MyISP
Active= Yes
Encapsulation= PPPoE
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login= N/A
Rem Password= N/A
Outgoing:
My Login= N/A
My Password= N/A
Authen= N/A
Press ENTER to Confirm or ESC to Cancel:
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
FIELD
Rem Node Name
Active
Encapsulation
Multiplexing
Service Name
Incoming:
Remote Node Configuration
Menu 11.1 - Remote Node Profile
Figure 14-2 Menu 11.1 Remote Node Profile
Table 14-1 Menu 11.1 Remote Node Profile
Type a unique, descriptive name of up to eight characters for this
node.
Press [SPACE BAR] and then [ENTER] to select Yes to activate or
No to deactivate this node. Inactive nodes are displayed with a minus
sign "–" in SMT menu 11.
Select the encapsulation type your ISP uses
PPPoE - A dial up connection that uses PPPoE encapsulation and
requires a username and password.
RFC 1483 - An always up connection that uses the RFC1483
protocol.
Press [SPACE BAR] and then [ENTER] to select the method of
multiplexing that your ISP uses, either VC-based or LLC-based.
When using PPPoE encapsulation, type the name of your PPPoE
service here.
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= N/A
Period(hr)= N/A
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout(sec)= N/A
DESCRIPTION
Prestige 623ME-T User's Guide
Edit IP/Bridge Options
in menu 11.3.
Edit ATM Options in
menu 11.6
Edit Filter Sets in
menu 11.5.
EXAMPLE
MyISP
Yes
PPPoE
LLC-based
N/A
14-3
Advertisement
Table of Contents
